Clear bowl fuel filter complete with element

Clear bowl fuel filter complete with element

Code:
NF10
Easily the most popular of our filter range, the NF10 clear bowl assembly is the perfect filter for gravity feeds and pump systems up to 60LPM and 100PSI. The assembly is suited for both diesel and petrol filtration, so no need for different assemblies.

The standard assembly has a clear polycarbonate bowl which is easy to see through, allowing you to evaluate the cleanliness of our fuel during transfer. The sturdy cast alloy head has 1”/25mm BSP threads on the inlet and outlet, making it very easy to fit into new or existing installations, with flow direction stamped into the head.

The cast alloy head and clear bowl are easily threaded out of each other, allowing for quick and easy access to the element, which can be threaded off the head for quick replacement. The standard element is a particulate style filter for removing dirt, rust and other sediment from your fuel and is rated to 10 microns.

Built into the bowl on the assembly is a drain port, allowing you to drain any possible water that could have found its way into your fuel. The alternative to this is moving to a water blocking version of the filter, which is available as a full assembly and replacement element.
  • 10 micron paper element
  • 1" female BSP inlet/outlet
  • 60LPM maximum flow rate
  • Up to 100 PSI working pressure
  • Clear bowl for visual checking of fluid
  • Drain cock for excess fluid
  • Removable head
  • Replaceable element
  • For use petrol or diesel
  • Product dimensions: 150mmL x 150mmW x 390mmH
Replacement element: NS20

Optional water blocking upgrade:

Bare WB element: NS20WB
Full WB Assembly: NS10WB
NF10 Range
(Size: 568.6 KB)
More Information
Weight1.000000
Product Length (cm)47
Product Width (cm)21
Product Height (cm) 21

Write Your Own Review

You're reviewing:Clear bowl fuel filter complete with element
Please type the letters and numbers below