2 micron Cimtek water absorbing element

2 micron Cimtek water absorbing element

Code:
EFHD-1502W
When it comes to high flow filtration, you don’t have to look any further than Equipcos EFHD range of filters. Our EFHD-1502W model filter covers all the bases in a single unit. With water absorbing properties and rated to take out particulates of 2 micron (that’s 0.002mm) or larger, it’s our most recommended model for high flow filling of common rail equipment. It’s rated to handle flows of up to 150LPM and pressures up to 50psi.

Manufactured in the USA by Cimtek, we’ve been selling these filters for years and they’ve become a core part of range, trusted by our customers.They have a simple thread on/off design for quick and easy replacement and upgrades. They also always come with a fresh gasket on each replacement element, giving you peace of mind on the assembly sealing.

This filter comes in three main assemblies, with replacement elements always readily available -
EFHD-1502W-25 - This is our 25mm/1” BSP assembly for mid to higher flow assemblies.
EFHD-1502W-40 - A larger ported assembly - 40mm/1½” BSP for less restriction
EFHD-3002W-50 - The biggest of the set with 50mm/2” BSP ports, this uses 2 elements for a maximum flow of 300LPM.
  • 2 micron Cimtek water absorbing element
  • element number: 70037
  • 50 PSI
  • 151 LPM
  • Use with Diesel, petrol, ULSD and biodiesel use. Hydroglass.
EFHD Fuel Filters
(Size: 277.8 KB)
EFHD-1502W
(Size: 376.3 KB)
More Information
Weight2.000000
Product Length (cm)47
Product Width (cm)21
Product Height (cm) 21

Write Your Own Review

You're reviewing:2 micron Cimtek water absorbing element
Please type the letters and numbers below