10micron Hydrasorb water and sediment absorption element. 67LPM

10micron Hydrasorb water and sediment absorption element. 67LPM

Code:
200S-6710W
When it comes to protecting your plant and equipment from dirt and water in your fuel, we’ve got you covered. The 200S-6710W water absorbing filter element is perfect for mid flow jobs where there’s a worry about water, rust, dirt and other sediment being in your fuel. It’s rated to absorb water mixed in with your fuel as well as take out particles of 10 microns or larger - that’s a 100th of a mm. Rated for flows up to 94LPM and a max pressure of 50PSI, it’s perfect for mid range filling applications. We’ve got options in higher flows as well if needed.

The 200S series are manufactured in the USA by Cimtek, so you’re guaranteed quality across the entire range. They have a simple thread on/off design for quick and easy replacement and upgrades. They also always come with a fresh gasket on each replacement element, giving you peace of mind on the assembly sealing.

The filter is available in two assemblies, with spare elements always ready to go -
200S-6710W-25 - Our most common, 25mm/1” assembly ready to go for most applications.
200S-13410W-40 - A dual element assembly for a higher flow, rated to 134LPM and with 40mm/1½” inlet and outlet.
  • 10 micron Hydrasorb water and sediment absorption element.
  • 94LPM
  • 50 PSI max
  • Diesel, petrol, ULSD, ethanol blends up to 15%. Hydrosorb
200S-942W
(Size: 532.6 KB)
200S-6710W
(Size: 417.7 KB)
More Information
Weight1.000000
Product Length (cm)47
Product Width (cm)21
Product Height (cm) 21

Write Your Own Review

You're reviewing:10micron Hydrasorb water and sediment absorption element. 67LPM
Please type the letters and numbers below